 |
| |||||
| ||||||||||||||
Faital Pro 6FE200 - 6" 130W 4 Ohm Loudspeaker
Nominal Specifications
- Nominal Diameter - 160 mm (6 in)
- Overall Diameter - 167.4 mm (6.59 in)
- Bolt Circle Diameter - 154 mm (6.06 in)
- Baffle Cutout Diameter - 144 mm (5.67 in)
- Depth - 77 mm (3 in)
- Flange and Gasket Thickness - 8 mm (0.31 in)
- Net Weight - 2 Kg (4.41 lb)
- Shipping Box(Single Carton Box) - 190 x 185 x 103 mm (7.5 x 7.3 x 4.0 in)
- Shipping Weight - 2.2 Kg (4.85 lb)
Technical specifications
- Nominal Diameter: 160 mm (6in)
- Overall Diameter: 167.4 mm (6.59in)
- Bolt Circle Diameter: 154 mm (6.06in)
- Baffle Cutout Diameter: 144 mm (5.67in)
- Overall Depth: 77 mm (3.03in)
- Flange/Gasket Thickness: 8 mm (0.31in)
- Impedance: 4 ohm
- Minimum Impedance: 3.6 ohm
- AES Power: 130 W
- Program Power: 260 W
- Sensitivity: 95 dB
- Frequency Range: 85:6000 Hz
- Voice Coil Diameter: 37 mm (1.46in)
- Voice Coil Material: Al
- Voice Coil Former: Kapton
- Voice Coil Depth: 11.9 mm (0.47in)
- Magnetic Gap Depth: 8 mm (0.31in)
- Surround Type: M-Roll
- Spider Profile: 1x constant height waves
- Chassis Material: Steel
- Magnet Material: Ferrite Ring
- Demodulating Ring: No
- Flux Density: 1 T
- Driver Displacement Volume: 0.45 L (0.016ft^3)
Thiele and Small parameters: Need some help? Read our quick guide to TS Params.
- Resonance (Fs) - 120 Hz
- DC Resistance (Re) - 3 Ohm
- Electrical Q (Qes) - 0.45
- Mechanical Q (Qms) - 6.2
- Total Q (Qts) - 0.42
- Compliance Equivalent Volume (Vas) - 4.3 L
- Diaphragm Area (Sd) - 131 cm2
- Maximum Linear Excursion (Xmax) - 4.62 mm
- Maximum Mechanical Excursion (Xdamage) - 10.4 mm
- Moving Mass - System (Mms) - 9.7 g
- Force Factor (BL) - 7 Tm
- Voice Coil Inductance (Le) - 0.20 mH
- Moving Mass - Diaphragm (Mmd) - 8.0 g
- Compliance (Cms) - 0.18 mm/N
- Mechanical Resistance (Rms) - 1.2 Kg/s
- Reference Efficiency (Eta Zero) - 1.61 %
- Efficiency Bandwidth Product (EBP) - 267
Shipping Information
- Net Weight: 2 kg (4.4lb)
- Shipping Weight: 2.2 kg (4.9lb)
- Shipping Box: 190 x 185 x 103 mm
Notes
1 - AES Power: 2 Hours Test According to AES 2-1984 Rev. 2003
2 - Maximum/Program power is defined as 3 dB greater than AES Power
3 - Xmax: Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)
4 - Xdamage: Maximum excursion before permanent damage
| Other Faital Pro products similar to Faital Pro 6FE200 - 6" 130W 4 Ohm Loudspeaker: |
|
Seen this cheaper?
If you find 'Faital Pro 6FE200 - 6" 130W <span class="ohm_4">4 Ohm</span> Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
If you find 'Faital Pro 6FE200 - 6" 130W <span class="ohm_4">4 Ohm</span> Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
Faital Pro 6FE200 - 6" 130W 4 Ohm Loudspeaker PDF data sheet (187 kb)
View Faital Pro website for more information for Faital Pro 6FE200
SEARCH results for other drivers with similar T-S Parameters to Faital Pro 6FE200 - 6" 130W 4 Ohm Loudspeaker
What do these labels mean?
- Original
- We believe this is an exact match for the original part, although we can't always verify the factory specification.
- Aftermarket
- A lower-cost replacement made to match the original part's size, shape and fit. Sound and performance may differ.
- Equivalent
- A very close match. The original may have been a slightly different factory version.
- Alternative
- A different part we recommend for this model when the usual replacement is unavailable. Check any fit or installation notes before ordering.
| Equipment | Original part | Match type |
|---|
Ask about this product
Product reviews
Write a reviewWrite a review
You must be logged in to submit a review. Log in