The Flex15 flatpack kit has been designed to take the hassle out of building simple, versatile, high quality speaker cabinets. This is a general purpose cabinet that can either be used as a mid-high or a full range speaker, and can be customised to suit your needs.
To maximise versatility we have designed the cabinet around the P-Audio SC series of Horn Flares, there are currently five in the range:
1" Horn Flare Options: SC-1064 1" 60 x 40 or SC-1096 1" 90 x 60
1.4" Horn Flare Options: SC-1464 1.4" 60 x 40 or SC-1496 1.4" 90 x 60
2" Horn Flare : SC-2064 2" 60 x 40
All 5 horn flares have the same panel cut-out and will fit in this design, and all 5 horn flares are rotateable, so you can have 40 x 60, 60 x 40, 90 x 60 or 60 x 90 depending on application. With a choice of throat sizes, there is a solution for just about everything.
1 x Front baffle precut for typical 15" mid-bass woofer and SC series horn flare.
2 x side panels, with mitred angles and CNC cutouts and recesses for 3402 steel bar handles.
1 x Rear panel with mitred angled edges. Precut with recess for 87160 angled connector dish.
1 x Top Panel with curved front edge for continuous curve when stacking multiple panels
1 x Bottom Panel with curved front edge.
1 x Internal Middle brace
1 x Combinatation Port/Grille Support
2 x Curved grille supports. 1 has no cutouts, this fits the top of the speaker, the second (optional) has a recess on the back so it can sit over the front gasket of the 15" woofer.
3 x Port Braces for added strength
4 x Grille battens
The front panel is cut from high quality 18mm birch ply, and the other panels are 15mm high quality birch ply.
To assemble this flatpack, simply follow the procedure in our example video on youtube https://youtu.be/PIpjlCs7zis