COOKIES: Our website uses cookies in order to provide a better online experience, this is essential for use of the shopping basket, and to login to our website. We require your consent to use cookies in order to meet relevant regulations. Please CLICK HERE to indicate your consent and continue using our website. We do not use third party tracking cookies on our website, cookies are used for this site's functionality only.
B & C

B&C 10MBX64 10" 350W 8 Ohm

With Faston Spade Terminals
Product Code: BAC10MBX64A Brand: B & C Model: 10MBX64
B&C 10MBX64 10 inch 350W 8 Ohm
£154.56
£128.80 ex VAT
Decrease Increase
2
IN STOCK
NO DELIVERY PRICE available for Country
B&C 10MBX64 10" 350W 8 Ohm

The MBX series mid-bass woofers from B&C Speakers offer acoustic designers a new range of high efficiency, wide bandwidth alternatives that are not currently available in the B&C range. These full-featured transducers incorporate lightweight neodymium motors, inside/outside wound copper clad aluminum wire voice coils, weatherproof impregnated paper cones, and a symmetrical inductance profile. The MBX Series is especially well suited for two-way loudspeaker enclosures.


  • 700 W continuous program power capacity
  • 64 mm (2.5 in) aluminium voice coil
  • 65 - 6000 Hz response
  • 100 dB sensitivity
  • Neodymium inside slug magnet assembly
  • Aluminium demodulating ring allows a very low distortion figure
  • Ventilated voice coil gap for reduced power compression
Specifications:

  • Nominal diameter 250 mm (10.0 in)
  • Nominal impedance 8 ohms
  • Minimum impedance 6.5 ohms
  • Nominal power handling 350 W
  • Continuous power handling 700 W
  • Sensitivity (1W/1m) 99.0 dB
  • Frequency range 65 - 6000 Hz
  • Voice coil diameter 64 mm (2.5 in)
  • Winding material Aluminium
  • Former material Glass Fibre
  • Winding depth 13 mm (0.51 in)
  • Magnetic gap depth 8 mm (0.31 in)
  • Flux density 1.25 T


Design:

  • Surround shape Double Roll
  • Cone shape Radial
  • Magnet material Neodymium Inside Slug
  • Spider Single
  • Pole design T-Pole
  • Woofer cone treatment Hydrophobic Treatment


Parameters:

  • Fs 65 Hz
  • Re 5.4 ohms
  • Qes 0.28
  • Qms 4.0
  • Qts 0.26
  • Vas 26.0 dm3 (0.92 ft3)
  • Sd 346.0 cm2 (53.63 in2)
  • Reference efficiency 3.1 %
  • Xmax 4.5 mm
  • Xvar 5.0 mm
  • Mms 33 g
  • Bl 17.1 Txm
  • Le 0.44 mH
  • EBP 232 Hz


Mounting And Shipping Info:

  • Overall diameter 261 mm (10.28 in)
  • Bolt circle diameter 245 mm (9.65 in)
  • Baffle cutout diameter 230.0 mm (9.06 in)
  • Depth 128 mm (5.04 in)
  • Flange and gasket thickness 17 mm (0.67 in)
  • Air volume occupied by driver 1.5 dm3 (0.05 ft3)
  • Net weight 3.2 kg (7.05 lb)
  • Shipping weight 3.8 kg (8.38 lb)
  • Shipping box 330x330x160 mm (12.99x12.99x6.30 in)
  • Service Kit RCK10MBX648
Other B & C products similar to B&C 10MBX64 10" 350W 8 Ohm:
Price match on B&C 10MBX64 10 inch 350W 8 Ohm
Seen this cheaper?
If you find 'B&C 10MBX64 10 inch 350W 8 Ohm' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
SEARCH results for other drivers with similar T-S Parameters to B&C 10MBX64 10" 350W 8 Ohm

Product reviews

Write a review

Write a review

Warranty support available