MBN :: MBN Snow & Foam :: MBN Foam Machines
|THIS ITEM IS NO LONGER AVAILABLE ON OUR WEBSITE - PLEASE EMAIL US IF YOU REQUIRE FURTHER INFORMATION.|
MBN FC500 Foam Cannon
The MBN FC-500 foam-cannon has an output-distance of approximately 8-10m and can be used for all foam-parties and other shows, where the foam should be shot into the air or into the crowd of people.
Because of its compact size, the MBN FC-500 can easily be transported. Therefore it's ideal for promoters and mobile discotheques. The foam-cannon can easily be installed, suspended by four tags. With the optional available metal rack on castors the foam-cannon can be paned horizontal and vertical on the ground. The MBN FC-500 has a foam output of about 100.000 litres/min. and is Made in Germany. The engine of the ventilator and the pump are German quality products as well.
The MBN FC-500 consists of the following components:
Regulation of quantity,
2m hose (between tank and pump),
15m hose (between pump and cannon).
For the operation of the MBN FC-500 a tank is required for the storage of the mixture (water and foam fluid). MBN provides for the MBN FC-500 a tank with a content of 600 litre or 1000 litre. MBN provides high-quality, totally safe foam concentrates in 25 l and 60 l containers. The MBN foam-fluid was especially developed for foam events and is dermatological tested (good to very good skin tolerability). If required, foam fluids can also be made available with various aromas.
Weight cannon, 45 kg
Dimensions cannon, 980 x 580 mm
Foam output: 25 cubic meters per minute
Quantity of foam, 100L /min
Output-distance, 8-10 m
Voltage supply, 230 V / 50 Hz
Power consumption, 1100 VA
Weight of pump, 10 kg
Dimensions of pump, 340 x 320 x 180 mm
Water consumption, 10-55 l/min
Power consumption of pump, 900 VA
|Other products you may be interested in:||