JAM Systems :: JAM Systems Amplifiers :: JAM Systems Stereo Power Amps :: JAM Systems X35

JAM Systems X35 2-Channel Power Amp [ 2 x 1750W]

2 x 800W @ 8 ohms, 2 x 1300W @ 4 ohms, 2 x 1750W @ 2 ohms

Product Code: JMSX35 Brand: JAM Systems

JAM Systems X35 2-Channel Power Amp [ 2 x 1750W]

£240.83
£240.83 ex VAT

Due
10 Feb 2026

Request stock Info

Sorry we dont have a delivery price for Country

Export prices without Sales Tax or VAT - additional customs fees may apply in your country

JAM Systems X35 2-Channel Power Amp [ 2 x 1750W]

The X-Series is a compact 1U range of professional power amplifiers designed for high efficiency, reliability, and clean audio reproduction. Each model uses a Class-D output stage and an LLC resonant SMPS with active PFC, ensuring stable performance across global mains voltages.

Key Features:

Compact 1U chassis, lightweight and portable
High-efficiency Class-D amplifier module with fixed switching frequency
Soft-start LLC resonant power supply
Active Power Factor Correction (PFC) for worldwide 90–264V AC operation
High damping factor for precise speaker control
Peak limiter for output protection
Output LC filtering for reduced switching noise
Temperature-controlled variable-speed fan with front-to-rear airflow
Selectable operating modes: Stereo, Parallel, Bridge
Input sensitivity options: 0.775V, 1V, or 32dB
Comprehensive protection suite including soft-start, DC and subsonic protection, VHF protection, thermal and short-circuit protection, overload protection, and clip/distortion limiting

Warranty

The amplifier is covered by a 1-year limited warranty against defects in materials and workmanship. Warranty excludes misuse, operating beyond stated specifications, or unauthorised repairs.

	Power
8Ω (stereo)	2 × 800W
4Ω (stereo)	2 × 1300W
2Ω (stereo)	2 × 1750W*
8Ω (bridge)	1 × 2600W

*2Ω operation supported for high crest-factor programme material only.

Technical Specifications
Frequency Response: 20Hz – 20kHz (+/-0.5dB)
THD+N: ≤ 0.05%
Signal-to-Noise Ratio: >104dB (A-weighted)
Damping Factor: ≥ 600
Slew Rate: >20 V/μs
Input Sensitivity: 0.775V / 1V / 32dB
Input Impedance: >20kΩ (balanced)

Load Impedance and Operating Notes
4Ω per channel is stable for all normal applications and is the recommended minimum load for long-term operation and maximum thermal reliability.
2Ω per channel operation is supported for high crest-factor programme material such as live music or speech. Sustained high output levels or continuous low-frequency content at 2Ω may result in increased thermal stress and possible overheating. Adequate ventilation must be ensured when operating at low impedances.

General
Dimensions (W × D × H): 482 × 251 × 44 mm
Net Weight: 5 kg
Audio Input Connections: 3-pin XLR
Amplifier Outputs: Industry-standard 4-pole locking loudspeaker connectors
Mains Connection: IEC inlet (power cable included)
Operating Modes: Stereo, Parallel Mono, Bridge
In Parallel Mono mode, Channel 1 gain control is used for both output channels.
Cooling: Front-to-rear forced-air cooling – rear ventilation must be kept unobstructed

Other JAM Systems products similar to JAM Systems X35 2-Channel Power Amp [ 2 x 1750W]:

JAM Systems HX240 2-Channel Power Amp [ 2 x 800W]

£207.50

JAM Systems 2-Channel Power Amp [2 x 850W]

£137.50

JAM Systems X80 2-Channel Power Amp [ 2 x 4000W]

£474.17

JAM Systems X72 2-Channel Power Amp [ 2 x 3600W]

£415.83

Seen this cheaper?
If you find 'JAM Systems X35 2-Channel Power Amp [ 2 x 1750W]' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.

JAM Systems X35 2-Channel Power Amp [ 2 x 1750W] PDF data sheet (295 kb)

JAM Systems X35 2-Channel Power Amp [ 2 x 1750W]

Product reviews

Write a review