
| ||||||||||||
Beyma 8BR40/N - 8" 50W 8 Ohm
This 8" bass and mid bass loudspeaker has been specifically designed to deliver exceptional low and mid frequency reproduction, with high sensitivity and extremely low distortion. It incorporates a curvilinear cone attached to a rubber surround, in order to provide suspension stability and to allow maximum excursion linearity. By combining a powerful magnet construction with a cast aluminium basket, this model achieves high power capacity, and consequently, contributes to reduce the thermal power compression.
TECHNICAL SPECIFICATIONS:
CONSTRUCTIVE DETAILS:
- Power capacity 50 W RMS
- Nominal diameter 200 mm 8 in
- Nominal impedance 8 ohm
- Minimum impedance 6.4 ohm
- Program power 100 W
- Sensitivity 91 dB 1 W @ 1m @ 2%u03A0
- Frequency range 30-6000 Hz
- Recommended enclosure volume 20 / 60 l 0.7 / 2.12 cu ft
- Voice coil diameter 25.4 mm 1 in
- BL factor 6.8 N /A
- Moving mass 0.021 kg
- Winding length 16 mm
- Air gap height 6 mm
- Xdamage pp 20 mm
Thiele and Small parameters: Need some help? Read our quick guide to TS Params.
- Fs 30 Hz
- Re 5.5 ohm
- Qms 2.1
- Qes 0.48
- Qts 0.39
- Vas 89.1 l
- Cms 1301 micro m / N
- Rms 1.99 kg / s
- Efficiency % 0.5
- Sd 0.022 sq m
- Xmax 6 mm
- Vd 147 cu cm
- Le @1 kHz 0.5 mH
CONSTRUCTIVE DETAILS:
- Net weight 1.36 kg 2.99 lb
- Total weight 1.55 kg 3.41 lb
- Magnet Ferrite
| Other Beyma products similar to Beyma 8BR40/N - 8" 50W 8 Ohm: |
|

Seen this cheaper?
If you find 'Beyma 8BR40/N - 8" 50W <span class="ohm_8">8 Ohm</span>' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
If you find 'Beyma 8BR40/N - 8" 50W <span class="ohm_8">8 Ohm</span>' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
What do these labels mean?
- Original
- We believe this is an exact match for the original part, although we can't always verify the factory specification.
- Aftermarket
- A lower-cost replacement made to match the original part's size, shape and fit. Sound and performance may differ.
- Equivalent
- A very close match. The original may have been a slightly different factory version.
- Alternative
- A different part we recommend for this model when the usual replacement is unavailable. Check any fit or installation notes before ordering.
| Equipment | Original part | Match type |
|---|---|---|
| Beovox S45 | 8" Bass driver | A very close match in fit and performance. The original may have been a slightly different version of this part. |
Ask about this product
Product reviews
Write a reviewWrite a review
You must be logged in to submit a review. Log in

