
| ||||||||||
Beyma 10CMV2 - 8 Ohms 10" loudspeaker driver, 250 watts AES, 500 watts music program
The CMV2 series, composed of 5 models (6.5, 8, 10, 12 and 15"), is an extension of Beyma's current offer of pressed steel frame speakers. Designed using their exclusive basket and ceramic magnets, these 100% Made in Spain products present linear Frequency Response Curves, low distortion and a remarkable increase in power; Standing well above of similar products from their competitors.
- Key Features
- High power handling: 500 W program power
- 1.5' copper wire voice coil
- High sensitivity: 95 dB (1W / 1m)
- Very linear extended response and low distortion
- Treated double roll cloth surround
- Optimized pressed steel frame
- Ferrite magnet
- Designed for bass and midbass applications in small vented cabinets
- Technical Specifications
- Nominal impedance 8 Ohm
- Power capacity 250 W AES
- Nominal diameter 250 mm 10 in
- Sensitivity 95 dB 1 W/1 m @ ZN
- Minimum impedance 7.2 ohm
- Frequency range 60-5000 Hz
- Program power 500 W
- Recommended enclosure volume 30 l
- Voice coil diameter 38.1 mm 1.5 in
- BL factor 13.4 N/A
- Moving mass 0.042 kg
- Winding length 16 mm
- Air gap height 7 mm
- Xdamage pp 30 mm
- Thiele-Small Parameters
- Fs 52 Hz
- Re 5.9 ohm
- Qms 3.8
- Qes 0.47
- Qts 0.42
- Vas 44 l
- Cms 216 µm / N
- Rms 3.7 kg / s
- Efficiency % 1.3
- Sd 0.038 m²
- Xmax 6.5 mm
- Vd 247 cm³
- Le @1 kHz 0.8 mH
- Constructive Details
- Depth 115 mm 4.52 in
- Net weight 3.1 kg 6.82 lb
- Total weight 3.5 kg 7.77 lb
- Magnet Ferrite
| Other Beyma products similar to Beyma 10 CMV2 8 Ohm: |
|
SEARCH results for other drivers with similar T-S Parameters to Beyma 10CMV2 - 8 Ohms 10" loudspeaker driver, 250 watts AES, 500 watts music program
Skip to main 




