Fane Sovereign Pro 15-600LF - 15" 600W 8 Ohm
The Sovereign Pro 15-600LF is intended for use in two-way ported enclosures, such as the classic bass driver plus horn tweeter or compression driver format. The unit features a die cast chassis with long throw motor system and long throw surround allowing solid bass reproduction at high-power levels. The driver exhibits a smooth frequency response to give a balanced tonal characteristic when properly matched to appropriate high-frequency drivers. The Sovereign Pro 15-600LF can also be used in ported bass enclosures to deliver tight accurate bass down to 40 Hz. The unit features a 3-inch voice coil with a power handling of 600 Watts and an average sensitivity of 98 dB.
- 1200 W Program Power.
- 98 dB Sensitivity (1W/1m).
- Highly versatile in two-way ported enclosures.
- Smooth frequency response and balanced tonal character.
- Long throw motor system and surround for solid bass reproduction at high power levels.
- Delivers tight accurate bass down to 35 Hz in 75-150 Litre enclosures.
- UK manufactured cone with optimised pulp offering increased strength, durability and performance.
- 3-inch Copper voice coil.
Electro Acoustic Specifications
- Nominal Chassis Diameter 15” / 381 mm
- Impedance 8 Ω
- Power Handling 600 w (A.E.S.)
- Peak Power (6dB Crest Factor) 2400 w (A.E.S.)
- Usable Frequency Range -6dB 35 Hz - 3.5 kHz
- Sensitivity (1 w - 1 m) 98 dB
- Moving Mass inc. Air Load 89 grams
- Minimum Impedance Zmin 6.5 Ω
- Effective Piston Diameter 330.96 mm / 13.03"
- Peak Displacement Volume of Cone Vd 0.59 litres
- Magnet Weight 100 oz
- Magnetic Gap Depth 10 mm / 0.39"
- Flux Density 1.1 Tesla
- Coil Winding Height 19 mm / 0.75"
- Voice Coil Diameter 76.2 mm / 3.0"
Thiele Small Parameters
- FS 40 Hz
- RE 6.5 Ω
- Qms 8.8
- Qes 0.38
- Qts 0.37
- Vas 188 litres
- Vd 0.59 litres
- CMS 0.18 mm/N
- BL 19.7 T/m
- Mms 89 grams
- Xmax 6.9 mm
- Sd 856 cm2
- Efficiency 3.05%
- Le (1k Hz) 1.85 mH
Mounting / Shipping Information
- Overall Diameter 406.4 mm
- Width Across Flats 387.35 mm
- Flange Height 7.62 mm
- Baffle Hole Diameter F/M 351.79 mm
- Baffle Hole Diameter R/M 355.6 mm
- Gasket Supplied Front & Rear
- Fixing Holes 4x 7.1 mm diam on 393.7 PCD / 8x 7.1 diam on 370 PCD
- Depth 174 mm
- Weight 9.3 kg
- Recommended Enclosure Volume 75 - 150 litres
- Shipping Weight 10.45 kg
- Packing Carton Dimensions 220 x 420 x 420 mm
Materials of Construction
- Former Material Glass Fibre
- Voice Coil Copper
- Magnet Material Ferrite
- Chassis Die-cast Aluminium
- Cone Curvilinear Paper
- Surround / Edge Termination Polyvinyl Damped Multi Roll. Poly Cotton
- Dust Dome Paper
- Connectors Push-button Spring Terminals
- Polarity Positive voltage at red terminal causes forward motion of cone
| Other Fane products similar to Fane Sovereign Pro 15-600LF - 15" 600W 8 Ohm: |
|
SEARCH results for other drivers with similar T-S Parameters to Fane Sovereign Pro 15-600LF - 15" 600W 8 Ohm
2 IN STOCK
View Fane website for more information for Fane Sovereign Pro 15-600LF