CLICK HERE to indicate your consent and continue using our website.
The Sovereign Pro 15-600LF is intended for use in two-way ported enclosures, such as the classic bass driver plus horn tweeter or compression driver format. The unit features a die cast chassis with long throw motor system and long throw surround allowing solid bass reproduction at high-power levels. The driver exhibits a smooth frequency response to give a balanced tonal characteristic when properly matched to appropriate high-frequency drivers. The Sovereign Pro 15-600LF can also be used in ported bass enclosures to deliver tight accurate bass down to 40 Hz. The unit features a 3-inch voice coil with a power handling of 600 Watts and an average sensitivity of 98 dB.
Highly versatile in 2-way ported enclosures.
Smooth frequency response.
Delivers tight accurate bass down to 40 Hz.
UK manufactured cone with optimised pulp offering increased strength, durability and performance.
Electro Acoustic Specifications
Nominal Chassis Diameter 15” / 381 mm
Impedance 8 Ω
Power Handling 600 w (A.E.S.)
Peak Power (6dB Crest Factor) 2400 w (A.E.S.)
Usable Frequency Range -6dB 35 Hz - 3.5 kHz
Sensitivity (1 w - 1 m) 98 dB
Moving Mass inc. Air Load 89 grams
Minimum Impedance Zmin 6.5 Ω
Effective Piston Diameter 330.96 mm / 13.03"
Peak Displacement Volume of Cone Vd 0.59 litres
Magnet Weight 100 oz
Magnetic Gap Depth 10 mm / 0.39"
Flux Density 1.1 Tesla
Coil Winding Height 19 mm / 0.75"
Voice Coil Diameter 76.2 mm / 3.0"
Thiele Small Parameters
FS 40 Hz
RE 6.5 Ω
Vas 188 litres
Vd 0.59 litres
CMS 0.18 mm/N
BL 19.7 T/m
Mms 89 grams
Xmax 6.9 mm
Sd 856 cm2
Le (1k Hz) 1.85 mH
Mounting / Shipping Information
Overall Diameter 406.4 mm
Width Across Flats 387.35 mm
Flange Height 7.62 mm
Baffle Hole Diameter F/M 351.79 mm
Baffle Hole Diameter R/M 355.6 mm
Gasket Supplied Front & Rear
Fixing Holes 4x 7.1 mm diam on 393.7 PCD / 8x 7.1 diam on 370 PCD
Depth 174 mm
Weight 9.3 kg
Recommended Enclosure Volume 75 - 150 litres
Shipping Weight 10.45 kg
Packing Carton Dimensions 220 x 420 x 420 mm
Materials of Construction
Former Material Glass Fibre
Voice Coil Copper
Magnet Material Ferrite
Chassis Die-cast Aluminium
Cone Curvilinear Paper
Surround / Edge Termination Polyvinyl Damped Multi Roll. Poly Cotton
Dust Dome Paper
Connectors Push-button Spring Terminals
Polarity Positive voltage at red terminal causes forward motion of cone