Beyma 5MP60/N - 5" 50W 8 Ohm
This 5" bass and mid frequencies loudspeaker has been designed to provide a smooth, flat and wide frequency response. It features a polypropylene cone, rubber surround and special design magnet system, including a copper ring on the pole piece to achieve low harmonic distortion and high efficiency. This model is especially well suited for use in small bass-reflex cabinets for high quality monitor applications.
TECHNICAL SPECIFICATIONS:
- Power capacity 50W RMS
- Nominal diameter 125 mm 5 in
- Nominal impedance 8 ohm
- Minimum impedance 5.5 ohm
- Program power 100 W
- Sensitivity 88 dB 1 W @ 1 m @ ZN
- Frequency range 50-12000 Hz
- Recommended enclosure volume 10 / 20 l 0.35 / 0.7 cu ft
- Voice coil diameter 25.4 mm 1 in
- BL factor 6.4 N / A
- Moving mass 0.011 Kg
- Winding length 14 mm
- Air gap height 6 mm
- Xdamage pp 20 mm
Thiele and Small parameters: Need some help? Read our quick guide to TS Params.
- Fs 63 Hz
- Re 5.33 ohm
- Qms 2.3
- Qes 0.58
- Qts 0.46
- Vas 5.77 l
- Cms 564 micro m / N
- Rms 1.95 kg / s
- Efficiency % 0.24
- Sd 0.0085 m²
- Xmax 5.5 mm
- Vd 46 cu cm
- Le @1 kHz 0.23 mH
CONSTRUCTION DETAILS:
- Net weight 1.2 kg 2.64 Ib.
- Total weight 1.27 kg 2.8 Ib.
- Magnet Ferrite
| Other Beyma products similar to Beyma 5MP60/N - 5" 50W 8 Ohm: |
|
SEARCH results for other drivers with similar T-S Parameters to Beyma 5MP60/N - 5" 50W 8 Ohm
