B & C

B&C 21SW115 - 21" 1700W 4 Ohm Loudspeaker

With Faston Spade Terminals
Product Code: BAC21SW115C Brand: B & C Model: 21SW115
B&C 21SW115 - 21 inch 1700W 4 Ohm Loudspeaker
PRICE MATCH:
£390.83
£390.83 ex VAT
SRP £462.78
Decrease Increase
Quantity Discounts
2-3£382.50 ea.
4-7£374.17 ea.
8+£365.83 ea.
2
IN STOCK
FREE DELIVERY for mainland UK
Export prices without Sales Tax or VAT - additional customs fees may apply in your country
B&C 21SW115 - 21" 1700W 4 Ohm Loudspeaker


  • 3400 W continuous program power capacity
  • 116 mm (4.5 in) split winding copper voice coil
  • 33 - 1000 Hz response
  • 97 dB sensitivity
  • 60 mm peak-to-peak excursion before damage
  • Neodymium magnet allows a very high force factor and linear excursion
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression
  • Aluminium demodulating ring for very low distortion

Specifications:


  • Nominal diameter 530 mm (21.0 in)
  • Nominal impedance 4 Ω
  • Minimum impedance 4.2 Ω
  • Nominal power handling * 1700 W
  • Continuous power handling * 3400 W
  • Sensitivity (1W/1m) * 97.0 dB
  • Frequency range 33 - 1000 Hz
  • Voice coil diameter 116 mm (4.5 in)
  • Winding material Copper
  • Former material Glass Fibre
  • Winding depth 34 mm (1.34 in)
  • Magnetic gap depth 14 mm (0.55 in)
  • Flux density 1.15 T

Design


  • Surround shape Triple Roll
  • Cone shape Radial
  • Magnet material Neodymium Inside Slug
  • Spider Double Silicone
  • Pole design T-Pole
  • Woofer cone treatment TWP Waterproof Both Sides
  • Recommended enclosure 250.0 dm3 (8.83 ft3)
  • Recommended tuning 32 Hz

Thiele and Small parameters:  Need some help? Read our quick guide to TS Params.


  • Fs 33 Hz
  • Re 3.6 Ω
  • Qes 0.37
  • Qms 7.7
  • Qts 0.36
  • Vas 278.0 dm3 (9.7 ft3)
  • Sd 1680.0 cm2 (260.4 in2)
  • η₀ 2.6 %
  • Xmax 14.0 mm
  • Xvar 15.0 mm
  • Mms 335 g
  • Bl 24.8 Txm
  • Le 1.7 mH
  • EBP 89 Hz

Mounting And Shipping Info


  • Overall diameter 547 mm (21.5 in)
  • Bolt circle diameter 527 mm (20.7 in)
  • Baffle cutout diameter 508.0 mm (20.0 in)
  • Depth 250 mm (9.9 in)
  • Flange and gasket thickness 14 mm (0.53 in)
  • Air volume occupied by driver 15.0 dm3 (0.53 ft3)
  • Net weight 14.0 kg (30.8 lb)
  • Shipping units 1
  • Shipping weight 16.4 kg (36.1 lb)
  • Shipping box 590x590x300 mm (23.1x23.1x11.8 in)
Other B & C products similar to B&C 21SW115 - 21" 1700W 4 Ohm Loudspeaker:
Price match on B&C 21SW115 - 21 inch 1700W 4 Ohm Loudspeaker
Seen this cheaper?
If you find 'B&C 21SW115 - 21 inch 1700W 4 Ohm Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
SEARCH results for other drivers with similar T-S Parameters to B&C 21SW115 - 21" 1700W 4 Ohm Loudspeaker

What do these labels mean?
Original
We believe this is an exact match for the original part, although we can't always verify the factory specification.
Aftermarket
A lower-cost replacement made to match the original part's size, shape and fit. Sound and performance may differ.
Equivalent
A very close match. The original may have been a slightly different factory version.
Alternative
A different part we recommend for this model when the usual replacement is unavailable. Check any fit or installation notes before ordering.
EquipmentOriginal partMatch type
FBT Mitus 121S21SW115

Search for speaker parts

Ask about this product

You're asking about B&C 21SW115 - 21" 1700W 4 Ohm Loudspeaker (BAC21SW115C).

You can reply to the confirmation email with a photo of the old part or its label.

Product reviews

Write a review

Write a review

✓
✓Warranty support available
✓
✓