Blue Aran "Tuff Cab" is a viscous coating which may be sprayed, rolled or brush applied and retains the application texture. The coating is flexible yet scratch resistant, highly durable and as it is a self crosslinking acrylic is water resistant when dried. It has been specifically developed for wood, plywood and mdf as a coating for flight cases and speaker manufacturing. This coating contains no solvents, and as such is easy to use as it require no specialist breathing apparatus or cleaning equipment.. The finished effect is satin to gloss finish, however the gloss increases with each coat. Brushes or application equipment should be washed with warm water whilst still wet. The best spray finishes for speakers and flight cases are from a light smooth finish, oversprayed with a heavier 'splatter' coat.
Please Note: Tuff Cab is designed primarily for use as a covering for new speaker cabinets and flight cases. It is possible for Tuff Cab to not bond perfectly with existing paint finishes, and you may need to rub down the surface to achieve good adhesion. It is also known that Tuff Cab does not always bond well with wood filler, and car body filler, and it is recommended to avoid using these over large areas before applying Tuff Cab. It is not necessary to use primer on bare wood - Tuff Cab bonds better when applied to bare wood without primer.
TECHNICAL DATA SHEET
HEALTH AND SAFETY DATA SHEET
Tuff Cab ®
is a registered trademark owned by Blue Aran Limited.